Monel® Alloy Coil (Monel 400, Monel K-500)
✓ Seawater & Acid Immunity: Resists 3.5% NaCl seawater pitting and 20% H₂SO₄ at 80°C (176°F) with **<0.02mm/year corrosion rate** (Monel 400).
✓ High-Strength Durability: Monel K-500 achieves 1,100 MPa tensile strength via age-hardening – 2x stronger than Monel 400.
✓ Thermal Stability: Maintains integrity from **-200°C (-328°F)** to 600°C (1,112°F).
✓ Precision Formability: Cold-rolled to **±0.05mm thickness tolerance** with Ra ≤0.8μm surface finish for stamping, welding, and deep drawing.
Monel® Alloy Coil (Monel 400, Monel K-500)
Engineered for industries battling seawater corrosion, acidic media, and high-stress fabrication, Monel® alloy coils combine nickel-copper matrices (Monel 400: Ni-67%, Cu-30%) to deliver superior performance in marine, chemical, and oil & gas applications. Certified to ASTM B164, ASME SB164, and NACE MR0175, these coils outperform stainless steel with 5x longer lifespan in saltwater, sulfuric acid, and hydrofluoric acid (HF) environments, ensuring reliability in the harshest conditions.
- Thickness: 0.1mm–12mm (cold-rolled) / 1mm–25mm (hot-rolled)
- Width: 50mm–2,000mm (slitting tolerance ±0.2mm)
- Surface Finishes: Pickled, Bright Annealed (BA), Electropolished (Ra ≤0.4μm)
- Mechanical Properties (Monel 400): Yield Strength ≥240 MPa | Tensile Strength ≥550 MPa | Elongation ≥35% | Hardness ≤150 HB
| Parameter Category | Monel 400 | Monel K-500 |
|---|---|---|
| Material Standard | ASTM B164, UNS N04400 | ASTM B865, UNS N05500 |
| Chemical Composition (%) | Ni: 63–70, Cu: 28–34, Fe: ≤2.5, Mn: ≤2.0, Si: ≤0.5, C: ≤0.3, S: ≤0.024 | Ni: 63–70, Cu: 27–33, Al: 2.3–3.15, Ti: 0.35–0.85, Fe: ≤2.0, Mn: ≤1.5, Si: ≤0.5, C: ≤0.25 |
| Tensile Strength (MPa) | 480–620 (Annealed) | 1000–1170 (Aged) |
| Yield Strength (MPa) | ≥170 (Annealed) | ≥690 (Aged) |
| Elongation (%) | ≥35 (in 50mm gauge length) | ≥20 (in 50mm gauge length) |
| Hardness | Rockwell B65–85 | Rockwell C25–35 |
| Density (g/cm³) | 8.80 | 8.44 |
| Melting Range (°C) | 1300–1350 | 1315–1350 |
| Thermal Conductivity (W/m·K) | 21.8 (at 20°C) | 26.0 (at 20°C) |
| Thermal Expansion (10⁻⁶/°C) | 14.4 (20–300°C) | 13.9 (20–300°C) |
| Electrical Resistivity (Ω·m) | 0.48 × 10⁻⁶ | 0.51 × 10⁻⁶ |
| Corrosion Resistance | Excellent resistance to seawater, hydrofluoric acid, alkalis, and saltwater pitting. | Similar to Monel 400, with enhanced resistance to stress corrosion cracking. |
| Heat Treatment | Annealing: 870–980°C (air cooling). | Solution Treatment: 980–1040°C (water quench) + Aging: 480–620°C for 16h. |
| Surface Finishes | Cold-Rolled Bright Annealed (BA), Pickled & Passivated. | Cold-Rolled Bright Annealed, Aged. |
| Coil Dimensions | – Thickness: 0.5–6.0mm – Width: 50–1500mm – Inner Diameter (ID): 300–610mm – Outer Diameter (OD): ≤2500mm. | – Thickness: 0.5–5.0mm – Width: 50–1200mm. |
| Key Applications | Heat exchanger coils, marine condenser tubes, chemical processing equipment. | High-strength marine springs, pump components, oil & gas downhole tools. |
Monel® Alloy Coil (Monel 400, Monel K-500) Applications
| Industry | Critical Use Cases | Monel® Coil Advantage |
|---|---|---|
| Marine Engineering | Seawater desalination coils, ship hull cladding | Zero pitting in 3.5% NaCl seawater for 20+ years. |
| Chemical Processing | HF acid evaporator coils, sulfuric acid reactors | Monel 400 resists 15% HF at 50°C (122°F). |
| Oil & Gas | Subsea pipeline liners, sour gas scrubbers | Monel K-500 withstands H₂S >5,000 ppm at 150°C (302°F). |
| Power Generation | Heat exchanger coils, boiler feedwater systems | Immunity to steam erosion at 400°C (752°F). |
Monel® Alloy Coil (Monel 400, Monel K-500) Product Packaging
Our Monel® Alloy Coils (Grades 400, K-500, ASTM B164/ASME SB-164 compliant) are engineered for demanding applications in marine engineering, chemical processing, and oil & gas systems. Renowned for their exceptional resistance to seawater corrosion, sulfuric acid, and high-salinity environments, these coils are protected by industry-leading packaging and logistics protocols compliant with ASTM B865, NACE MR0175, and MIL-STD-129 standards, ensuring pristine surface quality and dimensional stability during global transit.
Anti-rust packaging
VCI gas phase anti-rust film + desiccant (12 months moisture-proof for sea transportation)
Reinforcement method
Steel strapping + wooden pallet (load-bearing ≤ 5 tons)
Surface protection
Polyethylene film layered isolation (anti-scratch)
Customization options
IPPC fumigation wooden box (compliant with ISPM15 standard)
Monel® Alloy Coil (Monel 400, Monel K-500) Shipping
Sea transport
40HQ container (loading capacity 28 tons) / bulk carrier (LCL minimum 1 ton)
Air transport
reach major airports around the world within 7 days (DDP/DAP terms)
Land transport
door-to-door within China (qualification for dangerous goods transportation)
Our Services
We guarantee global door-to-door delivery within 7–15 business days via partnerships with DHL, Maersk, and UPS.
Why Choose Us?
Where Precision Meets Partnership，25 years of focus on metal material science，Not only a supplier, but also your engineering consultant，Fast and zero compromise，Sustainable trust cycle。
Full specifications and customization
Unlimited size, support non-standard cutting. Multiple surface treatments.
Professional capabilities
25 Years Of Focus On Metal Materials Science
Certification & Quality Assurance
Products comply with international standards such as ASTM, EN, JIS, etc., and are 100% tested from raw materials to finished products
Fast delivery & global supply
Global urgent orders are delivered within 15 days. One-stop service
FAQ
Q1: How does Monel 400 differ from Monel K-500?
A: Monel 400 prioritizes corrosion resistance and formability, while K-500 (age-hardened) offers 1,100 MPa tensile strength for structural applications.
Q2: What welding methods prevent hot cracking?
A: Use ENiCu-7 filler with TIG welding, maintain interpass temps ≤150°C (302°F), and avoid sulfur-containing environments.
Q3: Are coils certified for offshore oil platforms?
Full compliance includes:
- NACE MR0175/ISO 15156
- ASME SB164
- DNV-OS-F101 Subsea Standards
Q4: What’s the minimum order quantity (MOQ)?
Standard stock: 1 ton MOQ.
Custom sizes/tempers: 5 tons MOQ (lead time 35 days).
Q5: How to validate material authenticity?
Scan NFC tags with MonelGuard™ app to access:
- XRF validation against PMI certificates
- Third-party SGS/BV test reports
- Blockchain-validated ASTM B164 mill certs
Contact us by e-mail or whatsapp, 24 hours online.
- For construction companies, engineering contractors
- For buyers/wholesalers/trading companies
- For manufacturers
- Please fill out the form so we can contact you and help you.
- Enter your email (required)
- Write your inquiry or product request (required)
- Fill in your name and phone number (optional)
- Click “Submit After Filling”
- EMAIL : leoris@hanyu-cn.com
- We’ll reply within 2 hours (24/7 online via email & WhatsApp)